Monroe Cool Tool Tapping Fluid - Bio-degradable

Description

Monroe Fluid Technology
Cool Tool, 50 Gal Drum Cutting & Tapping Fluid
Straight Oil, For Blanking, Boring, Broaching, Drilling, Hobbing, Milling, Reaming, Tapping, Turning
1 unopened 55gal drum, never used
Part Number 0002-1-500
Features and Benefits
Cutting and tapping fluids are used for cooling and lubricating during the cutting or forming of a screw thread in a hole or part by means of a tap. These fluids can be material specific during high performance applications.
Straight oils are derived from mineral or vegetable oil and are used for general purpose applications. These oils do not contain water or additives and are commonly used for operations where lubricity is the primary use over cooling.
Specs
Type
Cutting & Tapping
Form or Style
Straight Oil
Container Size Range
50 Gal. and Larger
Container Type
Drum
For Use With
Ferrous Metals; NonFerrous Metals
Container Size
50 gal
Trade Name/No.
Cool Tool
Material Application
Ferrous Metals; Non-Ferrous Metals
PSC Code
9150
COOL TOOL is a universal cutting and tapping fluid that performs extremely well on ALL metals including Aluminum, Stainless Steel, exotic alloys and
some plastics. COOL TOOL does NOT contain 1,1,1- trichloroethane. COOL TOOL contains NO ozone depleting chemicals (ODCs).
Overview
Apply COOL TOOL cutting and tapping fluid directly to the cutting tool using a brush, oil can or other convenient applicator. May be used for drilling,
tapping, reaming, milling, turning, boring, broaching, hobbing and blanking of all metals.
Applications
Mixing is required.
Appearance Clear Amber liquid
Residual Film Soft, oily
pH @ 20:1 N/A
Specific Gravity @ 60°F 0.91 ± 0.01
Lbs/Gallon 7.6 ± 0.1
Flash point, PMCC 182° (360°F)
Barrel has been never opened, mix prior to using.
MSDS
Safety Data Sheet in accordance with Regulation (EU) No. 453/2010
and
OSHA 29 CFR 1910.1200
HCS
COOL TOOL
1
1.
Identification of the Substance/ Mixture and of the Company/ Undertaking
Product Name:
COOL TOOL
Preparation Date:
May
1
2
, 2015
Revision Date:
August 2
5, 2015
Recommended Use:
Metalworking Fluid
Supplier:
MONROE FLUID TECHNOLOGY
36 Draffin Road,
Hilton, N
Y 14468
Phone: 800
-
828
-
6351 585
-
392
-
3434
EMERGENCY NUMBER
S: CHEMTREC (800) 424
-
9300 Monroe Fluid Technology (800) 828
-
6351
2.
Hazard
s
Identification
GHS Classification:
Not classified as hazardous
G
HS Labelin
g:
Symbols:
None
Signal Word:
None
Precautionary Statements:
None
Classification according to Regulation (EC) No. 1272/2008 [CLP/GHS]
and
OSHA 29 CFR 1910.1200
HCS
:
Not classified as hazardous
Other Hazards Not Classified:
No significant hazards
3.
Composition/Information on Ingredients
Mixture:
Fats, oils
and additives.
Chemical Name
CAS Number
Concentration, Wt. %
Fatty oils and triglycerides
8016
-
28
-
2
Trade secret
4.
First Aid
Inhalation:
I
f inhaled, move to fresh air. If victim has stopped breathing give artificial
respiration, preferably, mouth to mouth. Contact a physician immediately.
Eyes:
Flush with large amounts of cold water for at least 15 minutes. Do
not let
v
ictim
rub eyes. If irritation develops, contact a physician immediately.
Ingestion:
Do not induce vomiting. Contact a physician immediately.
Safety Data Sheet in accordance with Regulation (EU) No. 453/2010
and
OSHA 29 CFR 1910.1200
HCS
COOL TOOL
2
Skin:
Wash affected area with soap and water. Remove contaminated
clothing.
Launder contaminated clothing before re
-
use.
Contact a physician if irritation
d
evelops
5.
Fire
-
fighting Measures
Suitable extinguishing media:
Use no water. Treat as an oil fire. Use carbon dioxide, foam
, sand or
sodium bicarbonate
Specific hazards:
None
Specific protective equipment and precautions for fire fighters:
Isolate fire area and deny unnecessary
entry.
Use
dry chemical,
alcohol
foam or carbon dioxide. Water may be ineffective but should be us
ed to
keep fire exposed containers cool. Water spray may be used
only to keep fire exposed containers cool,
protect personnel attempting to stop leak and disperse vapors.
Unusual Fire and Explosion Hazards: None
Flammability Properties:
Flash point:
1
82
o
C.
Method Used:
PMCC
6.
Accidental Release Measures
Personal precautions, protective equipment and emergency procedures:
Use personal protective equipment. Ensure adequate ventilation.
Environmental Precautions:
Do not allow spilled material to enter
sewers or streams.
If
material is released, indicate that there is a risk of
slipping
in the area.
If spills are likely to enter any drain,
waterway or groundwater, contact the appropriate governmental agenc
y.
Methods and materials for containment:
Add
dry material
to absorb (if large spill
,
dike to contain).
Using recommended protective equipment, pick up bulk of spill and containerize for recovery or disposal.
Flush area
w
ith water to remove residues.
7.
Ha
ndling and Storage
Precautions for safe handling:
Prevent small spills and leakage to avoid slip hazard.
Avoid contact with
skin, eyes and clothing. Keep out of the reach of children.
Conditions for safe storage:
Store in closed containers in a cool, dr
y well ventilated area
not exposed to
sunlight
. Maintain closure of bungs. Do not reuse container. Avoid container damage while storing.
Do not
allow material to be stored below
0
°
C. Do not allow material to freeze.
Empty containers retain residue (liqui
d and/or vapor) and can be dangerous. Do not pressurize, cut, weld,
bronze, solder, drill, grind or expose such containers to heat, flame, sparks, static electricity or other sources
of ignition; they may explode and cause injury or death. Do not attempt t
o
refill containers
since residue is
difficult to remove. Empty drums should be completely drained, properly bunged and returned to a drum
reconditioner. All containers should be disposed
of in
an environmentally safe manner in accordance with
governmental
regulations.
8.
Exposure Controls/Personal Protection
Safety Data Sheet in accordance with Regulation (EU) No. 453/2010
and
OSHA 29 CFR 1910.1200
HCS
COOL TOOL
3
Control parameters:
Exposure Guidelines:
None known
Appropriate engineering controls:
Proper protection and controls is dependent upon the potential
exposure conditions. No special requirements are
needed under ordinary conditions where adequate
ventilation is available.
Individual protective measures:
Respiratory protection:
General room ventilation should be satisfactory. Exhaust ventilation may be
necessary if misting is generated.
Eye protect
ion:
Safety glasses with shields or chemical goggles are required. Contact lenses should not be
worn if
the product could be splashed into the eyes.
Hand protection:
Rubber g
loves are re
commend
ed for single, short duration exposures
and f
or
prolonged or repeated exposures.
Body protection:
For single, short duration and for
prolonged or repeated exposures to the skin, wear
impervious, protective clothing including rubber
safety shoes to avoid skin contact.
9.
Physical and Che
mical Properties
Appearance
:
Clear amber liquid
Odor:
Bland
Odor Threshold:
N/A
pH :
@ 5% in water:
Not applicable
Melting point/freezing point:
3°
C
Initial boiling point and boiling range:
>
204
o
C
Flash Point (
PMC
C
):
182
o
C.
Evaporation Rate:
N/
D
Flamma
bility (Solid, Gas):
N/D
Upper/lower flammability or explosive limits:
UEL:
N/D
LEL:
N/D
Vapor pressure:
<0.01
Vapor density:
>1
Relative density:
0.91
+/
-
0.01
Partition coefficient n
-
octanol/water:
N/A
Autoignition Temperature:
No data available
Decomposi
tion Temperature:
N/A
Viscosity:
N/D
10.
Stability and Reactivity
Chemical stability:
Stable at normal conditions
Possibility of hazardous reactions:
Not expected and hazardous polymerization will not occur
Conditions to avoid:
Excessive Heat.
Incompatible
Materials:
None known
.
Hazardous decomposition products:
Oxides of carbon
and
nitrogen
.
Safety Data Sheet in accordance with Regulation (EU) No. 453/2010
and
OSHA 29 CFR 1910.1200
HCS
COOL TOOL
4
11.
Toxicological Information
Inhalation:
Short
-
term inhalation of concentrated mist/vapor from product may cause dizziness, nausea and
respiratory tract irritation in so
me individuals. Single exposure to oily mist/vapors is not expected to cause
acute toxicity.
Skin:
Prolonged or repeated contact may cause mild irritation of the skin.
Eyes:
Contact
may
cause irritation
Oral:
Small amounts ingested incidental to normal
handling are not likely to cause injury; larger amounts
ingested may cause injury. Ingestion may cause nausea.
Systemic (other target organ) Effects:
None known
Teratology (birth defects):
None known
Reproductive Effects:
None known
Mutagenicity (ef
fects on genetic material):
None known
Carcinogenicity:
IARC: NO NTP: No OSHA: No
12.
Ecological Information
Persistence and degradability:
Data is not available.
13.
Disposal Considerations
Disposal methods:
P501: Dispose of contents/ container
to an approved waste disposal plant
Dispose of in accordance with federal, state and local regulations
Precaution for disposal:
All recovered material should be packaged, labeled, transported
and disposed or rec
laimed in conformance with Good Engineering Practices. Comply with all applicable
governmental regulations. Avoid landfilling of liquids. Reclaim where possible.
14.
Transport Information
US DOT:
Not
regulated
by t
he US DOT
RID/ADR:
Not regulated by RID/ADR
IMO:
Not regulated by IMO
IATA:
Not regulated by IATA
15.
Regulatory Information
US TSCA
:
In compliance with the inventory
Canada DSL:
In compliance with the inventory
Cal. Prop. 65
This product does not intentiona
lly contain any chemicals known by the State of California to
cause cancer and/or birth
defects. Moreover, we do not routinely analyze its products for impurities which
may be such chemicals.
Safety Data Sheet in accordance with Regulation (EU) No. 453/2010
and
OSHA 29 CFR 1910.1200
HCS
COOL TOOL
5
SARA (313) TOXIC RELEASE INVENTORY:
This material contains no c
hemicals subject to the
supplier notification requirements of the SARA 313 Toxic Release Program.
VOC Content (SCAQMD ASTM 1868
-
10
)
:
38 g/l
16.
Other Information
Special Precautions to be Taken in Handling and Storage
:
Normal precautions common to good m
anufacturing practices should be followed in handling and storing.
Store away from food. Wash hands before eating, drinking or smoking. Use as directed.
Disclaimer:
This document has been prepared in good faith and from information provided to us by our
suppliers and other sources considered to be reliable. No warranty, express or implied is given. The buyer is
responsible to evaluate all available information when using this product for any particular use. The buyer is
also responsible for complying with
all Federal, State, Provincial, and Local Laws and regulations when
using this product